MultiWave V 3.2
The new MultiWave version 3.2 software gives your controller more features to help your pool/spa operate even better!
Download the free update today and enjoy these new features and enhancements:
• Service countdown timer mode – for temporarily disabling pump for service
• Controller displays wider range of air and water temperatures
• Time adjustments for cycling actuators during freeze conditions
• Assign specific circuits to activate during a freeze condition
• Set OFF time-only schedules without setting ON times
• Controller displays “Out of Range” when communication is lost
• Set heater temperatures to as low as 40°For OFF for better flexibility
• Current mode and temperature now highlighted on controller display
• Enable/disable pump and heater safety interlock
• Compatible with all advanced Auto Pilot Salt Chlorine Generator features
A C8700 Z-Wave USB stick is required to complete the software upgrade. To order the USB stick, visit www.intermaticstore.com
MultiWave Software Update
Combine the PE653 MultiWave Controller with the PE953 MultiWave Hand Held Transceiver and automate your
pool/spa and even your home with the most technologically advanced wireless control system in the market today.
The MultiWave is designed as a “plug and play” system. Install the water sensor PA122 and watch the MultiWave thermostat come alive to maintain your pool and/or spa water temperatures. Install the air sensor 178PA28A and let the MultiWave freeze protection system take over to protect your investment.
Connect your equipment to the intelligent RS485 communication port and relax as the MultiWave recognizes and controls your equipment with ease.
Combine the features of the PE653RC Multi-Wave Control System with the convenience of the PE20000 60 Amp Intermatic Panel and create a powerful PE20065RC wireless control system kit for any pool or spa installation. The PE20000 series panel includes a four position 60 Amp breaker base to accommodate a variety of different equipment loads and one mechanism slot to accommodate the vast array of mechanisms Intermatic has to offer. In addition, there is a low voltage raceway for low voltage control lines (i.e. actuators, sensors, etc…), two décor knockouts for GFCIs and switches, and a convenient side knockout for an outdoor receptacle.
Order PE24065RC, which includes a P4043ME mechanism and two PE24VA actuators, and remotely control any pool and spa combination. With this addition, you can now switch both your water valves and heater thermostat settings between your pool and spa with a click on your wireless control. These are by far the most affordable and versatile control systems offered today.
Some heat pumps can consume between 40 and 60 Amps worth of power; therefore, it may be necessary to have a higher amperage breaker base to accommodate heat pumps. Combine the features of the PE653RC Multi-Wave Control System with the convenience of the PE30000 80 Amp Intermatic Panel and create a powerful PE30065RC wireless control system kit for any pool or spa installation. The PE30000 Series Panel includes an eight position 80 Amp breaker base to accommodate a variety of different equipment loads and two mechanism slots to accommodate the vast array of mechanisms Intermatic has to offer. In addition, there is a low voltage raceway for low voltage control lines (i.e. actuators, sensors, etc…), four décor knockouts for GFCIs and switches, and a convenient side knockout for an outdoor receptacle.